FLYLINE SOLAR CHARGE CONTROLLER

The main theory of the Flyline solar charge controller is to limit and control the rate at which the electric current is added or drawn from the battery. Solar charge controller prevents overcharging and deep discharging, which can reduce the performance of the battery or its lifespan. Overall Flyline solar charge controller is zero- drop with high efficiency and the Solar charge controller is of Indian make with German technology.


The solar charge controller is used to convert the existing ups of any capacity and inverter to use solar power. We have different models of solar charge controllers as per the requirements of the customers and our charge controllers are also approved by Central Power Research Institute (CPRI) and ISO . Murickens manufacture and market three types of charge controllers, MOSFET, IGBT and MPPT, with international standards.

FLYLINE Pulse Width Modulation Solar Charging Controllers (PWM) Common Features

► The main advantage of Flyline Solar Charger is high efficiency " Zero Drop" (we get 100 % efficiency).►Compared to MPPT, there is no heat conversion efficiency lose in this special model. ►German Technology assures the quality of product. ► ISO 9001- 2008 certified Flyline Solar Charger. ► It is a commonly used product. ► This charge controllers are used for smaller and medium power controlling units. ► The technical features are the same with IGBT. ► The control system controls the whole system taking care of the battery over charging cut off, deep discharging cut off, protections in battery reverse, PV reverse, Overload and Short circuit. ► Our product connection diagram printed on it.►Micro controller based. ►LED, bar glass or LCD - display-battery voltage, load on/off, battery condition charging on/off.in 12/24 V ►In 36 and 48 v system LCD display is panel voltage , battery voltage, out current, solar in use, direct mains, saved unit,►Up to 80 amp auto detection for 12v/24v (automatic sensing).

FLYLINE PWM/MOSFET SOLAR CHARGER CONTROLLER TECHNICAL FEATURES
Switching 
Zero drop back to back PWM  MOSFET base 
Nominal battery voltage
12 V   to 48 V DC
Maximum out put amp
4AMP- 100 AMP 
Stand by consumption 
less than 1w
Charging REG
2  stage
Battery tem combination 
5MV@40DIG
Product Display
LED, bar graph or LCD
Max. panel  input voltage 
16V@12V
Battery input
 8 to15 Volt (for 12 V).19 to 30 Volt ( for 24 V)
Panel  input
 10 to30 Volt (for 24 V).21 to 60 Volt ( for 24 V)
Battery input
 32 to 60 Volt ( for 48 V)
Panel  input
 40 to 120 Volt ( for 48 V)
Mobile charging
USB & DC SOCKET in small capacities
DC LOAD
UN REGULATED
Efficiency
100 %

Flyline IGBT Solar Charging Controllers Common Features

► It is used for high voltage regulations. ►German Technology assures the quality of Flyline Solar Charger.► ISO 9001- 2008 certified ► Zero Drop model (we get 100 % efficiency). ► It is a commonly used product. ► IGBT charging controllers are used for medium and higher power controlling units. ► The technical features of MOSFET and IGBT are the same. ► The control system controls the whole system taking care of battery over charging cut off, deep discharging cut off, protections in battery reverse, PV reverse, overload and short circuit. ►Micro controller base. ►LCD display-battery voltage, load on/off, battery condition charging on/off.

 
Switching 
Zero drop back to back PWM  MOSFET base 
Nominal battery voltage
12 V   to 48 V DC
Maximum out put amp
4AMP- 80 AMP 
Stand by consumption 
less than 1w
Charging REG
2  stage
Battery tem combination 
5MV@40DIG
Product Display
LED, bar graph or LCD
Max. panel  input voltage 
16V@12V
Battery input
 8 to15 Volt (for 12 V).19 to 30 Volt ( for 24 V)
Panel  input
 10 to30 Volt (for 24 V).21 to50 Volt ( for 36 V)
Battery input
 32 to 60 Volt ( for 48 V)
Panel  input
 40 to 120 Volt ( for 48 V)
Mobile charging
USB & DC SOCKET in small capacities
DC LOAD
UN REGULATED
Efficiency
100 %

MPPT ( maximum power point Tracker) charging controller

► The art of solar MPPT (Maximum Power Point Tracker) determines the ideal operating point via processor –controller algorithm. This is significantly of incident light and temperature. ► The control system controls the whole system taking care of battery over charging cut off, deep discharging cut off, protections in battery reverse, PV reverse, overload and short circuit. ►MPPT Solar Charger have a power to increase the photovoltaic array power yield. ►It is most suitable for smaller power applications. If we use for higher application the heat conversion lose will be very high. ►Micro controller base. ►LCD display-battery voltage, load on/off, battery condition charging on/off.

FLYLINE MPPT  SOLAR CHARGER CONTROLLER TECHNICAL FEATURES
Nominal battery voltage
12v to 192 v dc
Maximum out put amp
40 to 80amp
Maximum solar array
2000 w @40 amp, 4000w@ 80 amp in 48 v
PV open CKT voltage   
120v @48 v design
Stand by consumption 
less than 2w
Charging REG
5 stage
Battery tem combination 
5MV@40DIG
Switching method 
 Buck boost DC to DC converter
Maximum Efficiency 
98%

Flyline Solar Charge Controller Images :-   Click Here

Flyline Solar Charge Controller Details :-   Click Here

ENQUIRY
Watts of some electronic products we use :- Click Here

Flyline Solar power plant installation video of MG Marketing System:-  Click Here

Murickes BrouchureClick Here

Some of our GOVT clients list :-Click Now

For quick response & order-call ( 91) 09400464444,  09447366779, 08281848484

Our Products

WEBSITES